DYNAgaurd L
The measurement system DYNAguard L is a microwave barrier and consist of a transmitter and a receiver unit. It is used for level monitoring or level detection of bulk material e.g. in silos, pipelines, chutes, containers, feeding- / receiving vessels and hoppers.
Brochure
Level detection of bulk solids
- Reliable level detection
- Contactless measurement
- Wide detection area
- Adjustable individually with LED display
- Easy installation also at GRP containers
More info
The measurement system DYNAguard L is a microwave barrier and consist of a transmitter and a receiver unit. It is used for level monitoring or level detection of bulk material e.g. in silos, pipelines, chutes, containers, feeding- / receiving vessels and hoppers.
Based on the est microwave technology, the transmitter unit lat sends out microwaves which are evaluated by the receiver unit. Bulk material that is conveyed e.g. into a hopper is piling up slowly between transmitter and receiver and attenuates the signal. This initiates a ndividually adjustable switching operation which indicates that a certain level in the hopper is reached. Conversely the system can be used for minimum level detection also when silos are emptied.
The DYNAguard L can also measure through electrical insulators. In case of special process conditions (temperature, pressure, specific products) this allows also to disconnect the system from the vessel to be monitored.
| Category | Parameter | Specification |
|---|---|---|
| Material | Housing | Stainless steel |
| Material | Sensor surface | Plastic (optionally ceramic for abrasive substances) |
| Protection | International Protection Rating | IP65 |
| Weight | Measuring System | 1.3 kg |
| Temperature | Storage temperature | -20 °C to 60 °C (non-condensing) |
| Temperature | Operating temperature | -20 °C to 60 °C (non-condensing) |
| Process | Process temperature | -20 °C to 85 °C |
| Process | Process pressure | Max. 2 bar (optionally 25 bar with ceramic sensor surface) |
| Electrical | Operating voltage | 24 VDC (18 VDC … 30 VDC) |
| Electrical | Current drain (Transmitter/Receiver) | Max. 80 mA |
| Electrical | Power | < 2 W |
| RF | Transmit frequency | 24.000 GHz … 24.250 GHz |
| RF | Transmit power | 10 dBm |
| Measurement | Measuring range | 15 cm up to 25 m |
| Switching | Hysteresis | Adjustable |
| Switching | Switching delay | Adjustable (50 ms to 50 s) |
| Relay output | Type | SPST or SPDT, floating |
| Relay output | Switching voltage | 35 VAC or 45 VDC |
| Relay output | Switching current | Min. 10 µA, Max. 1 A |
| Relay output | Switching power | 35 VA or 30 W |
| Connection | Cable gland | M16 |
| Connection | Connection type | Pluggable screw connectors |
Related products
Why Choose Process Networks?
ISO-Certified Quality
Our ISO 9001:2015 quality management system ensures full traceability across design, installation, calibration and support.
Technical Expertise You Can Reach
When you contact us, you speak directly to an expert — not a call centre.
Trusted Supplier Partnerships
Exclusive access to premium instrumentation from leading global manufacturers in Germany, Japan, the US and across Europe.
Long-Term Support & SLAs
Most customers stay with us for years because we stay with them providing ongoing maintenance, calibration and on-site service.
Proven Field Experience
Thousands of instruments installed and tens of thousands points monitored daily on systems we support.
Speak to a technical expert about this product
Our experts will guide you to the right solution whether you need a single sensor or a site-wide monitoring system.
Office
Process Networks Ltd,
Unit K20 Drinan Enterprise Centre,
Swords, Co. Dublin, K67 NN59
Call
(01) 211 8414
info@processnetworks.ie