F110 Safe area / Intrinsically safe - Flow rate Indicator / Totalizer

F110 Safe area / Intrinsically safe - Flow rate Indicator / Totalizer - Image 2

F110 Safe area / Intrinsically safe - Flow rate Indicator / Totalizer - Image 3

F110 Safe area / Intrinsically safe – Flow rate Indicator / Totalizer

The F110 flow rate indicator / totalizer is the most popular model in our range of flow rate indicator / totalizers, complete with pulse and analog output signals.

Enquire Now

Measures: Flow, Level, Pressure, Temperature, Transmitters

Industries: Animal Feed, Brewing, Chemical, Data Centre, Food, Hydrogen, Manufacturing, Pharma, Utilities, Wastewater, Water

Datasheet

Measure. Monitor. Repeat.

For better insights, better decision-making and better process performance.

Key Features & Benefits

Analog and pulse outputs.
Displays total and flow rate simultaneously and additional accumulated total.
Large digit selection for flow rate or total.
Flow rate: seven 17mm (0.67″) or 8mm (0.31″) digits.
Total – resettable: seven 17mm (0.67″) digits.
Accumulated total – not resettable: eleven 8mm (0.31″) digits.
Separate engineering units for flow rate and total on the display.
Remote control input to reset total or to lock the “clear total” button.
LED backlight.
Intrinsically safe according ATEX and IECEx.
GRP, Aluminum or high grade stainless steel enclosure.
Auto backup of settings and running totals in EEPROM memory.
Ambient temperature: -40°C to +70°C (-40°F to 158°F).
Various accessories are available for this product.

Typical Applications

Liquid flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.
The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -40°C up to +70°C (-40°F up to 158°F).

Product Description
Technical Data
Videos & Downloads

Advantages

Robust aluminum or stainless steel 316L field enclosure (IP65, IP67 / NEMA Type4X) .
It is so rugged, a truck can even stand on it!
Intrinsically Safe available - ATEX and IECEx approval for gas and dust applications.
Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost and aggravation.
Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

Signal, Power and Communication Specifications
Signal Inputs	Flowmeter Inputs: Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, sine wave (coil), active pulse signal (0)4 – 20 mA
Status Inputs	Remote control: External reset for clearing total or disabling manual clearing via keypad
Pulse Outputs	Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons) Max. frequency: 500 Hz Adjustable pulse length: 0.001 sec. to 9.999 sec. Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay
Alarm Outputs	None
Analog Outputs	Function: Re-transmitting the flow rate, scalable to any range (e.g. 200 L/min to 1200 L/min) Type: One passive isolated, floating or loop-powered 4 – 20 mA output, or one active (0)4 – 20 mA or 0 – 10 V DC output
Power Supply	Long life Lithium battery 4 – 20 mA loop-powered 8 – 24 V AC/DC 115 – 230 V AC Basic version: 8 – 30 V DC
Sensor Supply	3.2, 8.2, 12, 24 V DC
Intrinsically Safe Approvals	ATEX: Gas: II 1 G Ex ia IIB/IIC T4 Ga Dust: II 1 D Ex ia IIIC T200 / 100°C Da IECEx: Gas: Ex ia IIC/IIB T4 Ga Dust: Ex ia IIIC T200 / 100°C Da
Explosion Proof Approvals	ATEX / IECEx: Gas: II 2 G Ex db IIB + H2 T5 Gb Dust: II 2 D Ex tb IIIC T80°C Db
Communication	Function: All process data and settings can be read and modified through the communication link Protocol: Modbus ASCII / RTU Interface: RS232 / RS485 (2-wire or 4-wire) / TTL HART communication available with the F018 Flow Rate Monitor / Totalizer