B-Connected Basic - Flow rate Indicator / Totalizer

B-Connected Basic – Flow rate Indicator / Totalizer

Name: B-Connected Basic - Flow rate Indicator / Totalizer
Brand: FLUIDWELL
Availability: InStock

The Modbus communcation and isolated analog and pulse output signals make the B-Connected flow rate indicator / totalizer a dedicated flow transmitter for connection to an automation network or PLC. The display shows flow rate, total and accumulated total. The scaled pulse output re-transmits the accumulated total. The analog output re-transmits the flow rate. On-screen engineering units are easily configured from a comprehensive selection.

Enquire Now

Measures: Flow, Level, Pressure, Temperature, Transmitters

Industries: Animal Feed, Brewing, Chemical, Data Centre, Food, Hydrogen, Manufacturing, Pharma, Utilities, Wastewater, Water

Datasheet

Measure. Monitor. Repeat.

For better insights, better decision-making and better process performance.

Key Features & Benefits

Compact design.
Displays instantaneous flow rate, total and accumulated total.
Isolated analog and pulse outputs.
Modbus RS485 communication.
Durable IP65 (Type 4X) field, wall or meter mount enclosure.
One 20mm (0.79″) and two 16mm(0.63″) knock-out hole cable entries.
“Know one, know them all” configuration structure.
Easy reading and programming with clear alphanumerical display.
Clear 12mm(0.5”) numeric digits and 7mm(0.3”) alphanumeric digits.
Bright LED backlight.x

Typical Applications

Basic flow rate monitoring with a precise calculation over the full measurement range, where a connection to an automation network or PLC is required.
The B-series offers you an economical solution for common industrial applications. Nothing more, nothing less.

Product Description
Technical Data
Videos & Downloads

Advantages

Basic flow measurement where re-transmission of the flow rate and/or totalizer functions or serial communication is required.
The B-Series is our most cost effective display but with all the benefits you may expect from a Fluidwell product: It’s durable, reliable and very easy to operate. Basic with a capital B!
Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost and aggravation.

Technical Data – Flow Rate Monitor
Signal Inputs – Flowmeter Inputs	Namur; Reed-switch; NPN; PNP; Sine wave (coil)
Signal Outputs – Pulse Outputs	Function: Isolated, scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons) Frequency: User definable: Off; Long (5 Hz / 100 ms); Intermediate (33 Hz / 15 ms) Type: One isolated solid-state output
Signal Outputs – Alarm Outputs	None
Signal Outputs – Analog Outputs	Function: Re-transmitting the flow rate – output scalable to any range (e.g. 200 L/min to 1200 L/min) Type: One isolated 4 – 20 mA output
Signal Outputs – Control Outputs	None
Power Supply	Single 3.6 V lithium AA battery; 10 – 30 V DC
Sensor Supply	8.2 V DC
Intrinsically Safe	For Intrinsically Safe applications, the F-Series is recommended
Explosion Proof	For Explosion Proof applications, the E-Series is recommended
Class I, Division 2	For Class I, Div. 2 applications, the F103 is recommended
Communication	Function: All process data and settings can be read and modified via the communication link Protocol: Modbus RTU Interface: RS485 (2-wire) Additional: HART communication available with the F018 Flow Rate Monitor / Totalizer