MTP 200-TE

The universal transmitter MTP200i-TE converts various different input signals (mA, V, PT100, potentiometer, thermocouples, Thermocouple-resistance). The configuration can be done simply via our software. An electrically isolated mA / V output is available. Alarm monitoring takes place by two relay contacts and one transistor output. Additional another relay contact output is available for signalizing the safety functions. All output circuits can be used in safety circuits and are galvanic isolated from each other and from the power supply.

Enquire Now

Measures: Voltage

Industries: Animal Feed, Chemical, Hydrogen, Manufacturing, Paper, Pharma, Wood

Datasheet

Measure. Monitor. Repeat.

For better insights, better decision-making and better process performance.

Key Features & Benefits

SIL2-Transmitter in DuoTec-Failsafe Technology with self-monitoring
Inputs: Resistor and Pt100 with 2-, 3- and 4-wire switch, all types of thermocouple, current, voltage
Analogue output for mA and V
3 individually adjustable limit values
1 service alarm
Gradient alarm function
Square root of the output signal
Safe galvanic separation

MTP 200-TE

Simple Operation

Configuration / visualization software WINSMART
Diagnostic manager with fault memory
BUS-Integration (RS 232 and RS 485)
Power supply via DIN rail or terminal
Simple assembling

Product Description
Technical Data
Videos & Downloads

Function

Universal measuring transmitter in DuoTec-Failsafe Technology with self-monitoring
Certified according to IEC 61508 SIL2
Input: Resistor and Pt100 with 2-, 3- and 4-wire switch, all types of thermocouple, current, voltage
Output: 0/4-20 mA, 1-5/0-10 VDC, square rootable
3 individually adjustable limit values
(2 relays contact outputs, 1 transistor output)
1 service alarm
Galvanic separated between auxiliary energy, input and output(3 Port separation)
Executed on Namur recommendation NE 21
RS 485 bus connection via mounting rail bus connector
PC-connection via MÜTEC interface cable at the front
Configuration ON-LINE by MÜTEC-WINSMART software
Auxiliary energy: 24VDC/AC
Form of construction: DIN-Rail mounting, DIN EN 50022

Category	Specification
Analogue Inputs (AI1 – AI4)	First-order filter configurable (0.1 – 99.9)
AI1 – mA Input	Measuring range: -22…22 mA (configurable) Input resistance: 115 Ω
AI2 – Voltage Input	Measuring range: -11…+11 V (configurable) Input resistance: 100 kΩ
AI3 – Pt100 Input (DIN IEC 751)	2-, 3-, 4-wire connection Measuring range: -200…+800 °C Scale range: 5…1000 °C Measuring current: 1 mA Resolution: 0.01 K Max. loop resistance: 100 Ω
AI3 – Resistance / Potentiometer Input (DIN 43822)	2-, 3-, 4-wire connection Measuring range: 0…600 Ω or 0…5000 Ω Scale range: 3…600 Ω or 3…5000 Ω Measuring current: 1 / 0.2 mA Resolution: 0.01 / 0.1 Ω Max. loop resistance: 100 Ω
AI4 – mV / Thermocouple Input	Measuring range: -70…+70 mV (configurable) Input resistance: >10 MΩ Max. loop resistance: 2000 Ω Thermocouple types: B, E, J, K, L, R, S, T, U
Analogue Output (AO)	Galvanically isolated Ranges: 0…22 mA, 0…11 V Standard: 0/4–20 mA, 0/2–10 V Load: ≤500 Ω at 20 mA, ≥50 kΩ (voltage) Accuracy: 0.02% of final value Rise time: <150 ms
Contact Outputs	2× relay (REL1, REL2) + 1× transistor output (DO) 3 independently configurable alarms Alarm delay: 0…9.9 s Hysteresis: 0…99.9% Operating mode: NO / NC
Relay Outputs (REL1 / REL2)	Switching power: max. 62.5 VA / 30 W Switching voltage: max. 125 VAC / 110 VDC Switching current: max. 1 A Contact material: AgPd + 10 µAu
Transistor Output (DO)	Switching voltage: <28 VDC Switching current: <50 mA Switching power: <1.4 W
Maintenance Output (REL3)	Normally closed Indicates maintenance requirement Red LED indication
Supply	Supply voltage: 19…30 VDC or 18…28 VAC Power consumption: 1.2 W (4 mA) / 1.5 W (20 mA) Green LED status indication
Interfaces	COM / RS232 via front socket RS485 half duplex Baud rate: 9600 bps Device address: 1–248
General Accuracy	Typical: <0.02% of final value Maximum: <0.04% of final value
Temperature Coefficient	Typical: <0.005%/K Maximum: <0.01%/K
Ambient Conditions	Operation: -20 °C … +60 °C Storage: -30 °C … +80 °C Humidity: 10…95% r.H. (non-condensing)
Housing	Material: PBT Protection class: IP20 Flammability: UL94 V0 Dimensions: 22.5 × 114.5 × 99 mm Weight: 250 g DIN-rail mounting
Conformity	ATEX: EN 60079-0, EN 60079-11, EN 60079-26 EMC: EN 61000-6-2, EN 61000-6-4, EN 61326-1 Optional: ATEX [Ex ia] IIC