F132 Safe area / Intrinsically safe – Batch Controller
The F132 is a straight forward two stage batch controller with the unique function to send a “print receipt” command to a printer after every batch. The operator can easily enter a batch quantity, send an extra “print receipt” command or execute repeating batches.
Datasheet
Measure. Monitor. Repeat.
For better insights, better decision-making and better process performance.
Key Features & Benefits
- Receipt printing function after each batch.
- Large display shows preset value and running batch value simultaneously.
- Two-stage control for batching larger quantities.
- Self-learning overrun correction.
- Easy operation to enter a batch value and to control the process.
- Count-up and count-down function available.
- Actual batched quantity: seven 17mm (0.67″) digits.
- Preset value: seven 17mm (0.67″) digits during programming and 8mm (0.31″) digits during batch process.
- Total – resettable: seven 17mm (0.67″) digits.
- Accumulated total – not resettable: eleven 8mm (0.31″) digits.
- LED backlight.
- Intrinsically safe according ATEX and IECEx.
- GRP, Aluminum or high grade stainless steel enclosure.
- Auto backup of settings and running totals in EEPROM memory.
- Ambient temperature: -40°C to +70°C (-40°F to 158°F).
- Various accessories are available for this product.
Typical Applications
- For batching of small and /or large quantities, single or repeating batches where printed information is requested.
- The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -40°C up to +70°C (-40°F up to 158°F).
Advantages
- Robust aluminum or stainless steel 316L field enclosure (IP65, IP67 / NEMA Type4X) .
It is so rugged, a truck can even stand on it! - Intrinsically Safe available - ATEX and IECEx approval for gas and dust applications.
- Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost and aggravation.
- Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.
| Category | Specification |
|---|---|
| Signal Inputs | |
| Flowmeter Inputs | Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, sine wave (coil), active pulse signal |
| Status Inputs | |
| Remote Control | Start, Pause / Stop |
| Signal Outputs | |
| Pulse Outputs | None |
| Alarm Outputs | None |
| Analog Outputs | None |
| Control Outputs | Function: Control outputs for one- or two-stage batching with active overrun correction Type: Two passive NPN transistors, active PNP transistors, or isolated electro-mechanical relays |
| Power Supply | |
| Supply Options | Long-life lithium battery 4–20 mA output loop-powered 8–24 V AC/DC 115–230 V AC Basic: 8–30 V DC |
| Sensor Supply | 3.2 V, 8.2 V, 12 V, 24 V DC |
| Hazardous Area | |
| Intrinsically Safe | ATEX: Gas: II 1 G Ex ia IIB/IIC T4 Ga Dust: II 1 D Ex ia IIIC T200 100°C Da IECEx: |
| Explosion Proof | ATEX / IECEx: Gas: II 2 G Ex db IIB+H2 T5 Gb Dust: II 2 D Ex tb IIIC T80°C Db |
| Communication | |
| Function | Send the “print receipt” data after every batch |
| Protocol | ASCII data |
| Interface | RS232 / RS485 (2-wire or 4-wire) / TTL |
| Remark | There is no handshaking or interfacing with the printer. Data is sent using plain ASCII characters. |
| Category | Specification |
|---|---|
| Signal Inputs | |
| Flowmeter Inputs | Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, sine wave (coil), active pulse signal |
| Status Inputs | |
| Remote Control | Start, Pause / Stop |
| Signal Outputs | |
| Pulse Outputs | None |
| Alarm Outputs | None |
| Analog Outputs | None |
| Control Outputs | Function: Control outputs for one- or two-stage batching with active overrun correction Type: Two passive NPN transistors, active PNP transistors, or isolated electro-mechanical relays |
| Power Supply | |
| Supply Options | Long-life lithium battery 4–20 mA output loop-powered 8–24 V AC/DC 115–230 V AC Basic: 8–30 V DC |
| Sensor Supply | 3.2 V, 8.2 V, 12 V, 24 V DC |
| Hazardous Area | |
| Intrinsically Safe | ATEX: Gas: II 1 G Ex ia IIB/IIC T4 Ga Dust: II 1 D Ex ia IIIC T200 100°C Da IECEx: |
| Explosion Proof | ATEX / IECEx: Gas: II 2 G Ex db IIB+H2 T5 Gb Dust: II 2 D Ex tb IIIC T80°C Db |
| Communication | |
| Function | Send the “print receipt” data after every batch |
| Protocol | ASCII data |
| Interface | RS232 / RS485 (2-wire or 4-wire) / TTL |
| Remark | There is no handshaking or interfacing with the printer. Data is sent using plain ASCII characters. |
Why Choose Process Networks?
ISO-Certified Quality
Our ISO 9001:2015 quality management system ensures full traceability across design, installation, calibration and support.
Technical Expertise You Can Reach
When you contact us, you speak directly to an expert — not a call centre.
Trusted Supplier Partnerships
Exclusive access to premium instrumentation from leading global manufacturers in Germany, Japan, the US and across Europe.
Long-Term Support & SLAs
Most customers stay with us for years because we stay with them providing ongoing maintenance, calibration and on-site service.
Proven Field Experience
Thousands of instruments installed and tens of thousands points monitored daily on systems we support.
Speak to a technical expert about this product
Our experts will guide you to the right solution whether you need a single sensor or a site-wide monitoring system.
Office
Process Networks Ltd,
Unit K20 Drinan Enterprise Centre,
Swords, Co. Dublin, K67 NN59
Call
(01) 211 8414
info@processnetworks.ie