MSK 200-TE

Name: MSK 200-TE
Brand: MUTEC
Availability: InStock

The transmitter power supply unit MSK200i-TE is used for supplying of 2-wire transmitters and for processing of analogue mA-signals. An electrically isolated mA / V output is available. The HART signal connection to the intrinsically safe power supply circuit can be done by using the front socket. Alarm monitoring takes place by two relay contacts and one transistor output. Additional another relay contact output is available for signalizing the safety functions. All output circuits can be used in safety circuits and are galvanic isolated from each other and from the power supply

Enquire Now

Measures: Voltage

Industries: Animal Feed, Chemical, Hydrogen, Manufacturing, Paper, Pharma, Wood

Datasheet

Measure. Monitor. Repeat.

For better insights, better decision-making and better process performance.

Key Features & Benefits

SIL2-Transmitter in DuoTec-Failsafe Technology with self-monitoring
Input for the supply of 2-wire transmitters Input for mA-current
Analogue output for mA and V
3 individually adjustable limit values
1 service alarm
Gradient alarm function
Square root of the output signal
Safe galvanic separation

MSK 200-TE

Operation

Configuration / visualization software WINSMART
Diagnostic manager with fault memory
BUS-Integration (RS 232 and RS 485)
Power supply via DIN rail or terminal
Simple assembling

Product Description
Technical Data
Videos & Downloads

Function

More info

Alarm monitoring takes place by two relay contacts and one transistor output. Additional another relay contact output is available for signalizing the safety functions. All output circuits can be used in safety circuits and are galvanic isolated from each other and from the power supply.

Category	Specification
Analogue Input (AI)	First-order filter: 0.1 – 99.9 s (parameterizable) Measuring range: 0…22 mA (configurable) Input resistance: 51 Ω + 2× UD
Supply Circuit (SP)	First-order filter: 0.1 – 99.9 s (parameterizable) Umax: 22.4 V at 4 mA load Umin: 17.3 V at 20 mA load Imax: 24 mA Pmax: 360 mW
Analogue Output (AO)	Galvanically isolated from input and power supply Output ranges: 0…22 / 22…0 mA, 0…11 / 11…0 V Standard: 0/4–20 mA, 0/2–10 V Load: ≤500 Ω at 20 mA, ≥50 kΩ (voltage) Accuracy: 0.02% of final value Load influence: <0.005% (current), 0.5% at RL=100 kΩ (voltage) Rise time: <150 ms
Alarm Outputs	3 independently adjustable limit values Alarm outputs: 2× relay (REL1, REL2) + 1× transistor (DO) Alarm delay: 0…9.9 s Hysteresis: 0…99.9% Operation mode: operating or zero-current principle
Relay Outputs (REL1 / REL2)	Switching power: max. 62.5 VA / 30 W Switching voltage: max. 125 VAC / 110 VDC Switching current: max. 1 A Min. contact voltage/current: 10 mV / 10 µA Contact material: AgPd + 10 µAu
Transistor Output (DO)	Switching voltage: <28 VDC Switching current: <50 mA Switching power: <1.4 W
Maintenance Output (REL3)	Normally closed contact Maintenance requirement indication Red front LED
Power Supply	Supply range: 19…30 VDC or 18…28 VAC Power consumption (feed separator): 1.6 W (4 mA), 2.1 W (20 mA) Power consumption (buffer amplifier): 1.1 W (4 mA), 1.4 W (20 mA) Status indication: Green LED
Interfaces	COM / RS232 via front socket RS485 half duplex, no termination Baud rate: 9600 bps Device address: 1–248 HART via supply circuit (0…3 kHz bandwidth)
Measurement Accuracy	Typical: <0.025% of final value Maximum: <0.05% of final value
Temperature Coefficient	Typical: <0.005%/K Maximum: <0.01%/K
Environmental Conditions	Operation: -20 °C … +60 °C Storage: -30 °C … +80 °C Humidity: 10…95% r.H. (non-condensing)
Housing	Material: PBT Protection class: IP20 Flammability: UL94 V0 Dimensions: 22.5 × 114.5 × 99 mm (without terminals) Weight: 250 g DIN-rail mounting
Conformity	ATEX: EN 60079-0, EN 60079-11, EN 60079-26 EMC: EN 61000-6-2, EN 61000-6-4, EN 61326-1 ATEX data: [EEx ia] IIC
ATEX Electrical Data	Power supply circuit: Ui <25.8 V, Ii <65 mA, Pi <420 mW, Co 83 nF, Lo 4 mH mA input circuit: Ui <30 V, Ii <110 mA, Pi <700 mW